Home | Audio | DIY | Guitar | iPods | Music | Brain/Problem Solving | Links| Site Map
This work is licensed under a Creative Commons License.
How to Create BGM Loops with Audacity
(Background Game Music)
Loops are commonly used for BGM in video games. There are more interesting solutions such as tracker modules or dynamic stuff, but for most games loops are just fine. They are simple to use and generally work everywhere.
Typical BGM loop usage in games:
Now that you roughly know what loops can be used for, I'll explain how to make your piece of music loop perfectly. I'll use Audacity for this, because it's open source software, cross platform (Windows, Mac OS, and Linux), and perfectly suited for this task.
After you've composed your track in your favorite software sequencer (it doesn't matter if you use Rebirth, Reason, Orion or whatever - it's the same everywhere) ensure that it loops fine there. That is, set start and length accordingly and let it play continuously. If everything is fine, you can move on with this tutorial.
Step 1: Exporting twice
First export the loop as WAV. Well, that was easy.
Then add lots of empty padding at the end. Ensure that no sound is played there and that the master mixer stays where it is. You have to "wait" till all samples/synths are finished and this can take quite a bit - especially if there is some delay, echo or reverb involved. So, add sufficiently big padding. As a rule of thumb: make the padding as long as the loop itself. E.g. if the loop starts at bar 1 and has a length of 16, change it to 32.
With a playlist like Orion's it's quite easy to ensure that no new sounds are played. If I remember correctly Reason offers something similar. Rebirth, however, doesn't. It's a bit of a pain in that regard.
First export loop settings (Orion):
Second export loop settings (Orion):
Now export that padded loop as WAV as well. I usually put an underscore character at the end of the file name, because it visualizes that running flat out aspect (of the wave form) very well.
Step 2: Make it Loop
Start Audacity and change the sampling rate of the project if necessary:
The default is 44100Hz (or 44.1kHz), which usually is what you want. If your source material happens to use a different sampling rate change it via that context menu, which appears if you click on that button in the lower left.
With that potential issue out of the way drag both WAVs into Audacity:
In the lower right you can see the stuff our first exported loop is missing. Without it the beginning sounds weaker than it should and it may even introduce audible artifacts such as plopping or clicking.
Note: If the second export doesn't end with complete silence increase the padding until it does.
Zoom in until you can see the sampling points. Keep the end of the upper track on screen while you zoom in. It's a bit fiddly, but not that hard to do. Place the cursor in the lower track right after the end of the upper track. At this zoom level it's hard to miss:
Now select everything from the cursor position to the start of the track via Edit->Select...->Start to Cursor.
Almost there. Zoom out via the button and you should see something like:
Now cut (Ctrl+X or Edit->Cut) or delete (del) the selection. After doing that you get the final result:
Now is a great chance to compare a plain export with our "bleed over" version. Hold shift and click on the play button for loop-playback. If you want to hear the plain export just the lower track (don't forget to un-mute it at the end). Awesome, isn't it?
The obvious last step is exporting as WAV via File->Export As WAV:
Exporting only as MP3 or Ogg Vorbis may be tempting, but you may need to re-encode it in a different format or different quality/bitrate settings later on. Lossy stuff won't do the trick. So, do yourself a favor and keep a lossless version around.
Home | Audio | DIY | Guitar | iPods | Music | Links | Site Map | Contact